VITCAS Flue Fire Cement is a high temperature ready mixed fireproof mortar paste , designed for the safe installation/jointing of Type A1 (BS EN1857) concrete flue liners (previously known as class 1) for use with domestic fires and stoves e.g. coal, wood burning or gas (including flame effect).
Main uses:
-
on fire bricks
-
fire grates
-
flue pipes
-
flue bricks
Application: Make sure the area is clean and that all dirt, dust, rust and grease is removed. Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size. Dampen the surface where the material is to be applied. Apply using a cartridge gun. The material will set at room temperatures but the time will be reduced by lighting the fire or applying heat, gradually increasing over a four hour period
Technical:
Resistant to 1250oC /2280oF.
Colour: Beige/Grey
Asbestos free.
Not suitable for use as a screed or render nor for barbecues or other outside uses unless protected from water.
