Shopping Cart
Items:0
Total:£0.00
Manufacturers website

SPECIALIST IN HIGH TEMPERATURE APPLICATIONS

Select Currency

EuroPound SterlingUS Dollar
+44 (0) 117 911 7895

VITCAS Heat Resistant Tile Adhesive

VITCAS Heat Resistant Tile Adhesive
Vitcas Heat Resistant Tile Adhesive is a ready mixed tile cement specially formulated for use high temperature conditions where ordinary tile cements are inadequate for the long term retention of tiles. Ready Mixed; Easy to Use; Excellent bonding properties; *Rated to 1000ºC
Product Code: VITCAS-HRTA-5KG
Product Brand: Vitcas
RRP: £35.99
£19.99
(inc VAT:£23.99)

PRODUCT DESCRIPTION

Vitcas Heat Resistant Tile Adhesive

This product is a ready mixed tile adhesive specially formulated for use high temperature conditions where ordinary tile cements are inadequate for the long term retention of tiles.
  • Ready Mixed
  • Easy to Use
  • Excellent bonding properties
  • Rated to 1000°C
  • Colour: Buff / Grey

Vitcas Adhesive Applications

Product should be used for fixing tiles in areas subject to high temperatures, such as fire surrounds, behind boilers, ranges, cookers and radiators.
Only a thin joint is required (max. 3mm), ensuring that a repaired tile does not stand proud. Vitcas Tile Adhesive can also be used with stone, granite, marble and slate but heavy     
item must be physically supported.
For uneven surfaces where a thicker joints is needed use Vitcas HB60.  

Installation
Vitcas Adhesive should be used straight from the tub having stirred the contents into a smooth paste.
Tile Adhesive should be applied with a Vitcas 6mm tile comb on to wall and then the tiles should be pressed to the adhesive giving a 3mm bed. The adhesive will normally dry overnight but it is beneficial if the joint can be heated to some degree. When applying on fresh cement or plaster surfaces, it is important to seal the surface using a VITCAS PVA adhesive sealer before applying the adhesive, otherwise bonding may be impaired. If using porous tiles, marble, granite or slate it essential to seal the back surface with Vitcas PVA Adhesive Sealer.  
Surplus Heat Resistant Tile Adhesive must be removed immediately from any tile surfaces with a damp cloth.
Setting time allow 24h at room temperature but this time can be reduce by application of heat.
Tile Adhesive MUST BE completely set before grouting.
For internal use only, for external applications use Vitcas HB60.

Not to be used as a grout. For grouting use VITCAS Tile Grout
*Heavy tiles, stones, marble, granite etc. should be fully supported.


Technical:
Size: 5kg
Coverage: approx. 1kg per 0.25 square metres Colour: Off-white/ beige
Consistency: Paste
Maximum temperature: 1000 C
Initial setting time: 4-5 hours
Curing time: 24h above 20 C

RELATED PRODUCTS

CUSTOMER REVIEWS

Write an online review and share your thoughts with other shoppers...