Shopping Cart
Items:0
Total:£0.00
Manufacturers website

SPECIALIST IN HIGH TEMPERATURE APPLICATIONS

Select Currency

EuroPound SterlingUS Dollar
+44 (0) 117 911 7895
Home > FIREPLACE & STOVE MAINTENANCE > HEAT RESISTANT TILE ADHESIVE & GROUT

VITCAS Heat Resistant Tile Adhesive 310ml

VITCAS Heat Resistant Tile Adhesive 310ml
Heat Resistant Tile Adhesive in Cartridge. Vitcas Heat Resistant Tile Adhesive should be used for fixing tiles in areas subject to high temperatures, such as fire surrounds, behind boilers, ranges, cookers and radiators
Product Code: VITCAS-HRTA-310ML
Product Brand: Vitcas
RRP: £7.49
£2.99
(inc VAT:£3.59)

PRODUCT DESCRIPTION

Vitcas Heat Resistant Tile Adhesive is a ready mixed tile adhesive specially formulated for use high temperature conditions where ordinary tile cements are inadequate for the long term retention of tiles.
  • Ready Mixed
  • Easy to Use
  • Excellent bonding properties
  • Rated to 1000°C
  • Colour: Off-white/ Buff
Applications
Vitcas Heat Resistant Tile Adhesive should be used for fixing tiles in areas subject to high temperatures, such as fire surrounds, behind boilers, ranges, cookers and radiators.
Only a thin joint is required (max. 3mm), ensuring that a repaired tile does not stand proud. Vitcas Tile Adhesive can also be used with stone, granite, marble and slate but heavy     
item must be physically supported.
For uneven surfaces where a thicker joints is needed use Vitcas HB60.  

Installation
Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size. Dampen the surface where the material is to be applied. Apply using a cartridge gun. Aim for a final thickness of 3mm. The adhesive will normally dry overnight but it is beneficial if the joint can be heated to some degree. When applying on fresh cement or plaster surfaces, it is important to seal the surface using a VITCAS PVA adhesive sealer before applying the adhesive, otherwise bonding may be impaired. If using porous tiles, marble, granite or slate it essential to seal the back surface with Vitcas PVA Adhesive Sealer.  
Surplus Heat Resistant Tile Adhesive must be removed immediately from any tile surfaces with a damp cloth.
Setting time allow 24h at room temperature but this time can be reduce by application of heat.
Tile Adhesive MUST BE completely set before grouting.
For internal use only, for external applications use Vitcas HB60.

Not to be used as a grout. For grouting use VITCAS Heat Resistant Tile Grout


*Heavy tiles, stones, marble, granite etc. should be fully supported.

Technical:
Size: 310ml
Coverage: approx. 310ml cartridge per 0.125 square metres
Colour: Off white/ Buff
Consistency: Paste
Maximum temperature: 1000 C
Initial setting time: 4-5 hours
Curing time: 24h above 20 C
Coverage: A guide to the amount of the material contained in one 310ml cartridge
Bead dia. 4mm – length approx. 18 metres
Bead dia. 6mm – length approx. 8 metres
Bead dia. 8mm – length approx. 5 metres
Bead dia. 10mm – length approx. 3 metres

RELATED PRODUCTS

CUSTOMER REVIEWS

Write an online review and share your thoughts with other shoppers...