Applications

Vitcas^® Central Heating System Cleaner and Sludge Remover will remove commissioning and flux residues from new systems and restore circulation to old systems which suffer from sludge. System Cleaner should also be used when components are replaced or existing systems are extended.

VITCAS^® Heat Accumulation Fireboards are high density ceramic refractory panels for heat accumulation and storage. Easy to fix without wires or framework. Fireboards can be used around fireplaces and stoves. Fireboards can eliminate overheating in the room, returning the heat gradually over time.

VITCAS PVA Adhesive Sealer is an emulsion primer that should be utilised in conjunction with VITCAS Heat Resistant Products. High viscosity, water resistant and rapid drying material. To be used on fireboards, tiles and surfaces.

Vitcas Outdoor Oven Cement for exterior jointing with fire bricks in pizza and bread ovens, barbecues, smokehouses, fire pits, and other high temperature applications. It is a hydraulic set mortar which is non-soluble in water and resistant to rain and frost. Does not depend on heat in order to cure.

Vitcas Fire Rated Silicone Sealant is designed for fire protection purposes in the joints inside buildings. In the event of a fire, it will be able to maintain integrity and insulation value for 4 hours.

VITCAS Fibreglass Sleeving is designed to protect vessels, pipes and hoses against high temperatures and abrasion. The glass fibre sleeving also helps reduce heat loss and increase efficiency. Resistant up to 550°C / 1020°F. Available in white colour.

Vitcas HB60 is a hydraulic setting, heat resistant adhesive designed for fixing tiles, bricks and in the construction of stoves, pizza ovens, tiled stoves, grills and fireplaces. The adhesive can be used for gap filling as well and has a good working time.

Vitcas Ceramic Fibre Rigidiser- a silicate compound. The rigidiser is used for coating the surfaces of ceramic fibre materials. These include the ones used in ceramic kilns, forges and those exposed to high velocity gases. The product acts as a hardener and sealant for these different ceramic fibre surfaces.

VITCAS Ceramic Fibre Insulating Fibre Board is resistant to 1430^oC / 2600^oF. Dimensions: 1200x1000x25mm and 1200x1000x50mm. Due to its high heat resistance and lower thermal mass, heating/ cooling takes quicker and makes it ideal for glass slumping and ceramic kilns.

Clay firebrick outdoor wood fired pizza oven VITCAS-S is a small sized oven ideal for minimum assembly in the smaller space. Most ideal in domestic use, for when you have limited outdoor garden space or a smaller family/household.

BLACK Fire Cement formulated specifically for patching and repairs to firebricks, fireplaces, solid fuel ovens and boilers. Resistant to 1250ºC

VITCAS Zircon Refractory Paint Coating. It has a creamy consistency and can be applied directly. For spray application, it has to be thinned with water. Its maximum service temperature is of 1750°C / 3180°F. For use on furnaces, ladles, molten alloys, ceramic fibre linings and glass.

VITCAS oven Pompeii 140 is traditionally built from finest quality high temperature resistant refractory materials. Wood fired bread and pizza oven for use indoors and outdoors. Suitable for use in commercial applications e.g. festivals and restaurants etc.

Vitcas Heat Resistant Paint-High Temperature Paint Spray 400ml-Silver. Resistant to 800^oC (1472^oF). High Temperature Spray Paint for painting furnaces, heaters, barbecues, boilers, pipes and all types of equipment relating to high temperatures.

Ceramic Fibre Paper -VITCAS Ceramic Paper

VITCAS Ceramic Fibre Paper is supplied in 1mm, 2mm, 3mm and 5mm thickness and 610mm wide. Resistant to 1260°C /2300°F

Central Heating Internal Leak Sealer - Seals inaccessible leaks and weeping joints in central heating systems. Vitcas^>® Internal Leak Sealer is compatible with plastic tanks, micro bore and all metals including aluminium used in central heating systems.

Hose and Cable White Fibreglass Braided Sleeving. Available in diameters 10mm,15mm & 20mm. The sleeving is made from braided fibreglass and comes in white. Used for insulating and protecting electric wires & cables, hoses, gas & water pipes etc from aggressive fluids, gases and high temperature.

Bio soluble fibre insulation blanket can withstand temperatures of up to 1200ºC/ 2192ºF. It has a very low risk of hazard and is safe in use due to its low bio persistence and bio-degradability. Dimensions: 25mm thick, 610mm wide  with a density of 128KG/m³.

Vitcas Ceramic Fibre Insulating Board. Resistant to 1260^oC/ 2300^oF. Dimensions: 1200x1000x25mm and 1200x1000x50mm. Has a low heat conductivity at high temperatures and resists high gas velocity, which makes it ideal for boiler ducts, for kiln linings in glass and ceramics and for stack lining.

Chimney Flue 90 Degree Bend is made from stainless steel and is used for extending chimney flue pipes in a 90 degrees direction. To prevent  excessive smoke being released near and around the oven. This is for outdoor, wood burning bread and pizza ovens.

Aluminium Foil Tape with self-adhesive backing is perfect for applications which require thermal and electrical conductivity such as in pipe lagging, central heating systems and ventilation.

Vitcas Insulation Firebricks- Grade 23. Resistant to a high temperature of 1260^oC / 2300^oF. Dimensions: 230x114x76mm. Ideal for situations where heat storage properties are not desired, and for insulating in different refractories- ceramic kilns, furnaces, flues and other high temperature industrila equipment.

Vitcas^® Central Heating Boiler Noise Silencer is a non-acid boiler descaler which stays in the system for life; no need to flush. Noise Silencer is compatible with plastic tanks, microbore and all metals (including aluminium) used in central heating systems

CFA - Ceramic Fibre Adhesive is a silica based, high temperature, air setting cement for use as an adhesive for sticking ceramic fibre materials to brickwork, pizza ovens or metal.