Ceramics & Glass

Vitcas Insulation Fire Bricks- Grade 26. Resistant to 1430^oC (2600^oF). Dimensions: 230x114x76mm. The insulating firebricks can be used in a variety of high temperature industrial applications, such as in insulating refractories- gas producers, kilns, furnaces and stress relieving furnaces.

VITCAS Zircon Refractory Paint Coating. It has a creamy consistency and can be applied directly. For spray application, it has to be thinned with water. Its maximum service temperature is of 1750°C / 3180°F. For use on furnaces, ladles, molten alloys, ceramic fibre linings and glass.

Bio soluble fibre insulation blanket can withstand temperatures of up to 1200ºC/ 2192ºF. It has a very low risk of hazard and is safe in use due to its low bio persistence and bio-degradability. Dimensions: 25mm thick, 610mm wide  with a density of 128KG/m³.

Ceramic Fibre Paper - VITCAS Ceramic Fibre Paper is supplied in 1mm, 2mm, 3mm and 5mm thickness and 610mm wide. Resistant to 1260°C /2300°F

VITCAS Ceramic Fibre Insulating Fibre Board is resistant to 1430^oC / 2600^oF. Dimensions: 1200x1000x25mm and 1200x1000x50mm. Due to its high heat resistance and lower thermal mass, heating/ cooling takes quicker and makes it ideal for glass slumping and ceramic kilns.

Vitcas Insulation Firebricks- Grade 23. Resistant to a high temperature of 1260^oC / 2300^oF. Dimensions: 230x114x76mm. Ideal for situations where heat storage properties are not desired, and for insulating in different refractories- ceramic kilns, furnaces, flues and other high temperature industrila equipment.

Vitcas Ceramic Fibre Rigidiser- a silicate compound. The rigidiser is used for coating the surfaces of ceramic fibre materials. These include the ones used in ceramic kilns, forges and those exposed to high velocity gases. The product acts as a hardener and sealant for these different ceramic fibre surfaces.

VITCAS Silcas M - Air Setting Ready Mixed Refractory Mortar for lightweight firebricks and insulation materials up to 1430°C / 2600°F. It is a white refractory mortar so may be used where white mortar is needed for visual and aesthetic purposes. Used for setting and jointing of bricks and other products.

VITCAS Ceramic Fibre Insulation Blanket has a low thermal conductivity, high tensile strength and can withstand temperatures of up to 1260ºC/ 2300ºF. This grade of material can be purchased by the metre. Dimensions: 25mm and 13mm thick, 610mm wide; density: 128KG/m³. Free of asbestos so safe to use.

VITCAS Ceramic Fibre Blanket. Resistant to maximum service temperature of 1260^oC / 2300^oF. Density of 128kg/m³. Available in thickness of 13mm, 25mm and 50mm. Can be utilised in many industries such as petrochemical, steel and ceramics industries. Often used as insulation or for lining of furnaces.

Bio soluble fibre insulation blanket can withstand temperatures of up to 1200ºC/ 2192ºF. It has a very low risk of hazard and is safe in use due to its low bio persistence and bio-degradability. Dimensions: 25mm thick, 610mm wide  with a density of 128KG/m³.

VITCAS Ceramic Fibre Blanket. Resistant to 1430^oC / 2600^oF. Density of 128kg/m³. Available in thickness of 13mm, 25mm and 50mm. Can be used in ceramic kilns and in firing stoneware, in making of porcelain or bone china, and in stress relieving insulation, fire protection and power generation.

Vitcas Insulation Firebricks- Grade 28. Dimensions: 230x114x76mm. Resistant to 1530^oC / 2800^oF. The lightweight insulating fire bricks can be used in different industrial applications such as in lining ceramic kilns and furnaces, in areas that are not in contact with molten materials, etc. 

Castable Refractory (Refractory Concrete) is used for repairs to boiler linings, boiler doors and incinerator linings. For use where localised temperatures are higher; for example in gas or oil burner blocks and where forced air is being used.

VITCAS Silcas A - Air Setting Ready Mixed Refractory Mortar. High temperature resistance to 1400^oC. Ideal for jointing and setting fire bricks in, for example, kilns and furnaces.

Vitcas Ceramic Fibre Insulating Board. Resistant to 1260^oC/ 2300^oF. Dimensions: 1200x1000x25mm and 1200x1000x50mm. Has a low heat conductivity at high temperatures and resists high gas velocity, which makes it ideal for boiler ducts, for kiln linings in glass and ceramics and for stack lining.

VITCAS Ceramic Fibre Paper is supplied in 1mm, 2mm, 3mm and 5mm thickness and 610mm wide. Resistant to 1260°C / 2300°F.

Vitcas Insulation Firebricks- Grade 30. Dimensions: 230x114x76mm. Rates at 1650^oC / 3000^oF. The lightweight insulation fire bricks can be used for industrial applications such as in hot blast stoves, as primary hot face linings, for back up insulation for kilns and furnaces and for flue insulation.

CFA - Ceramic Fibre Adhesive is a silica based, high temperature, air setting cement for use as an adhesive for sticking ceramic fibre materials to brickwork, pizza ovens or metal.